Метка: dredger

Motor pumps for mini dredgers

For a mini dredger, inexpensive motor pumps with a capacity of up to 100-150 cubic meters per hour and a motor power of 7-15 hp are usually used.

The main motor pump, which pumps the water-soil mixture, is connected to a hose with a diameter of 76 or 100 mm.
Motor pumps for a hose with a diameter of 76 mm have a motor power of 6.5-9 hp.
Motor pumps for a hose with a diameter of 100 mm have a motor power of 11-16 hp.
The pressure developed by these motor pumps is within 2.5-3 bar.

Auxiliary motor pump for loosening bottom sediments
with a capacity of 5.5 — 7 hp and a maximum pressure of 5 — 7 bar.

Motor pumps for a mini dredger

Mini dredger with your own hands. Why?

A dredger is a set of mechanisms for loosening bottom sediments in reservoirs and pumping them in the form of a water mixture through pipes to a storage location.

A mini dredger has small, compact dimensions, low cost and allows it to be used for cleaning the bottom near berths and docks.
Allows you to remove fisheries waste from a reservoir and deepen the fairway on small rivers to 6 meters deep and pump mud and sand over a distance of 50-100 meters to the shore.

A mini dredger consists of two motor pumps, a pontoon, hoses and a suction nozzle with a nozzle for loosening.
Information on the selection of motor pumps, hoses and a suction nozzle, and advice on operation can be obtained

by phone: +380993603971 Viber, WhatsApp, Signal, Teams


e-mail: hydrodredger@gmail.com